We often get asked why someone would choose a Centurion over a Supreme and vice versa. Both are great boats that deliver incredible performance at an amazing value. The easiest way to figure out which is best for you is to compare the similarities and differences between the two lines.
Centurion and Supreme share some common things these include.
ICS Unibody Construction of the hull, deck and stringers. (Full integrated fiberglass seat bases, snap out carpet and single piece deck and hull).
Industry Leading Quality and Processes – Both boats are built in the same factory with similar grade materials and processes. No cutting corners to make a “cheaper” product with Supreme.
The same grade artisan gelcoat graphics.
Surftech-V hull Technology – Though they are each optimized for their respective designs, both are equipped with the only true wakesurf hull design (Supreme is the only value class boat that has been allowed to pull World Series of Wakesurfing Events).
PCM Hyperformance Direct Injection Engines – [...]
This is one of the most common and interesting questions we get at our dealership. I am sure that, if you have been looking for a new boat, almost every sales person you have spoken with has told you, in so many words, that the boat they sell has the best surf wave.
Here at BoardCo we find the answer to, “What boat has the best surf wave?” to be way more involved than the expected answer, “We do.” I often respond to this question with a question, “Will you please define for me what the ‘best surf wave’ means to YOU?” Without this information I cannot even begin to answer the question. This usually makes people stop and think as well it should. What the best wave is very much a personal opinion. I know that the surf wave that I like is different depending if I [...]
Over the past few years we have seen a whole bunch of “Surf Systems” hit the market. With so many options to choose from, a lot of people are left asking, “Is one better than another?” In this post we want to talk about the systems, what makes them different, and to try to cut through the marketing rabble to take a serious look at how they compare. I am going to apologize in advance; this topic gets pretty deep, and covering it is necessarily long. So sit back, grab a drink and forgive me for taking up a chunk of your day – I will do my best to make it worth your while.
Before we jump in, it is important to note that you should take some of the information with a grain of salt because we are not just comparing the systems, but comparing the systems on the boat that they are [...]
You know those yellow stickers on the boats that say something like “16 Persons or 2350 lbs?” One of the most common questions we get is, “Is ballast factored into those numbers?” or, in other words, “How many people is the boat rated for when the ballast is FULL?” This is an important question – probably more so than you might expect.
First, let’s talk about those ratings and where they come from – bear with me, this will all come together here soon. Most people think that those ratings are established by the Coast Guard,; however once a boat goes over 19 feet, the Coast Guard no longer gives specific ratings for capacity. The capacity ratings are, in most cases, established by a body referred to as the National Marine Manufacturers Association (NMMA). The NMMA is a governing body that ensures that boats built by participating manufacturers are up to certain safety standards, one [...]
Comments Off on There is No Replacement for Displacement
There is No Replacement for Displacement.
We are often asked why Centurion boats create such awesome surf waves. There are multiple factors that combine together to make a world class surf wave, one of which is experience. Centurion created its first surf boat hull way back in the 1990’s, way before surfing was the cool thing. Additionally, there are things like CATS, Quicksurf and trim tab shapes that allow for wake customization and tweaking. But the most important factor, by far, is displacement. There is no replacement for displacement.
What do I mean by this? Well, it’s simple; physics really does matter. There are natural laws that apply to wave/wake size and shape. The wave or wake of your boat (what you surf on) is created by your boat displacing water. So, in basic terms, with all things being equal (the hull shape, size, etc. of the vessel), the boat and ballast combination that weighs the [...]
Ever since PCM came out with the new direct injection H5 and H6 engines, we have been asked what the difference is between direct and sequential injection and if PCM is the only company using direct injection. I hope to answer both questions below. Here is some basic information about injection systems.
Basically, a SFI (sequential fuel injection) system has a fuel injector for each cylinder. Each of these injectors puts fuel into the system at 30-40 PSI before the intake valve. This air/fuel mixture is pulled into the cylinder past the intake valve on the intake stroke of the piston and is then compressed and ignited. This system was way more fuel efficient and created way more power than the carburation systems it replaced. Sequential fuel injection has been used in marine engines for several years and is the system that is currently used in most new towboats [...]